Be Our Guest

Okay, this one's a simple one, but I think it's too cute not to share. I saw this idea on Pinterest and decided I had to do it myself. I love entertaining. We probably have someone stay with us at least once a month. So, I decided to add a new decorative-ish piece to the guest room. See below.

All I used was a cheap 8x10 frame, a piece of decorative cardstock, and a printout with our wifi information.

This way, when our guests ask "hey what's the wifi password?" I can tell them to check in their room. ;)

Happy Entertaining!

In Case of Emergency, Break Glass

I found this idea on pinterest, and I thought it was super funny & cute, so I decided to make it for my best friend for Christmas.

Materials needed: shadowbox frame made with glass (I bought this one), clear contact paper, Armour Etch cream, sponge brush, an X-ACTO knife, print out in font of your choice that reads "IN CASE OF EMERGENCY BREAK GLASS", & lots of M&Ms (I bought one of those large re-sealable bags and used about half).

I used an 8x8 frame which turned out to be a perfect size. Make sure when you print out the template you print it so it fits well on the frame size you choose. I would also recommend using a very simple font. The more swoopy-ness there is, the harder this project will be!

Step 1: Tape the template on one side of the glass so you can read the saying on the opposite side of the glass.

Step 2: Put contact paper on the side of the glass without the template. It is VERY important that in the step you make sure there are little to no air bubbles in the contact paper. If there are a few air bubbles around the outside (not near the lettering) it should be okay, but try to avoid at all costs.

Step 3: Once the contact paper is smoothed down, you can begin carving the letters out of it. Using an XACTO knife, trace the letters and remove the contact paper where the letter should be. On letters like "A" or "R" be careful to keep contact paper where the hole in the letter should be. Letters with cut outs are definitely the hardest!

Step 4: Once all the letters are cut out, set up a station where you will apply the etching cream. Etching cream is highly acidic and can cause serious skin irritation, so take necessary precautions during application. I used plastic gloves, but was careful enough to not need them. 

Step 5: Once your station is set up, use the sponge brush to dab on the etching cream. Do not smooth it, just blot it on. I applied just enough etching cream so that it was opaque. 

Step 6: Review the directions on the etching cream bottle to be sure about the time you should leave the etching cream on. I left mine on for about 15 minutes to be safe. I do not think you need to leave it on for that long, but it doesn't hurt to do so. After washing off the etching cream with warm water, you can peel off all the remaining contact paper. The last thing you need to do is reassemble the frame and fill it with M&Ms!

Voila! It's somewhat difficult to read the etched message in certain lighting, but I think overall this project was a success! The gift recipient loved it.

Happy Shadowbox Etching!